Fristads Flame Retardant High Vis Class 1 Trousers 2587 FLAM - 125942

Fristads Flame Retardant High Vis Class 1 Trousers 2587 FLAM - 125942

Flame protective trousers approved for welding and certified for high visiblity class 1, with kneepockets of flame retardant CORDURA®. Durable and comfortable flame retardant treated material with welding reinforcements at front. Tested for 50 cycles in industrial laundry.

• Fristads Workwear
• Fristads Flame Retardant High Vis Class 1 Trousers 2587 FLAM - 125942
• 2 front pockets
• 2 CORDURA® reinforced back pockets with flap and concealed snap fastening
• Double reinforced crotch seam
• Hammer loop
• CORDURA® reinforced folding rule pocket with flap and concealed snap fastening and button and loop for sheath knife
• Leg pocket with flap and and concealed snap fastening, mobile phone pocket with flap and velcro fastening and D-ring
• CORDURA® reinforced knee pockets with inside opening
• Height adjustment for knee pads in knee pocket
• Aramide reinforced thigh panels
• CORDURA® reinforced leg end
• Approved after 50 washes

Safety Standards: IEC 61482-2 Electric arc "Box and Open arc test" || EN ISO 11612 Heat and flame || EN ISO 11611 Welding and allied processes || EN 1149-5 Electrostatic properties, design requirements || EN ISO 20471 High Visibility warning clothing || EN 14404 Knee protection || EN ISO 15797 - Industrial washing and finishing procedures for workwear || OEKO-TEX® certified || Approved according to EN 61482-1-2 class 1, EN 61482-1-1 ATPV: 10,6 cal cm² HAF: 80,4% (see Electric arc table for certified garment combinations for EN 61482-1-2 class 2 and open arc according to EN 61482-1-1), EN ISO 11612 A1 B1 C1 E2 F1, EN ISO 11611 A1 class 1 (see Flame and welding table for certified garment combinations for EN 11612 C2, E3, F2 and EN 11611 A1 class 2), EN 1149-5, EN ISO 20471 class 1 and EN 14404 together with kneepads 124292

Material/Fabric: 75% cotton, 24% polyester, 1% anti-static fibre. Reinforcement: 74% cotton, 25% para-aramid, 1% anti-static fibre. CORDURA® reinforcement: 79% cotton FR, 20% polyamide, 1% anti-static fibre. 365 g/m², reinforcement 340 g/m²

Mens C/D-Size Guide - Fristads

Taller Leg Options

Short Leg Options

Delivery & Charges

You can see what your delivery charge will be by adding items to the shopping basket.
(Enter your country/post code and press the update basket button)

​            1.      Choose all the products you require and add them to your basket

            2.      Then add the type of branding you require to the basket. 
                                                                  You can CLICK HERE to add branding.
            ________________________________

PRINTED LOGO/TEXT PRICES (exc. VAT)

EMBROIDERED LOGO/TEXT PRICES  (exc. VAT)

• Small:  100mm wide (approx). Usually for left or right breast on the front of garments. 
• Large:  230mm wide (approx). Usually for large areas/on the backs of garments.
• Prices are per text/logo and per position.
• Minimum Qty for caps: 12
• Embroidered logos above 20,000 stitches will incur extra fees due to the significant extra costs and time incurred to produce them. You will be contacted should this apply to your logo. Extra costs will be worked out based on each individual logo that this applies to.
• You will be advised if a garment is not suitable for printing or embroidery.

Embroidery

We offer an embroidery service to have your garments branded with stitched logos or text. This process is an extremely popular choice for high quality, visible branding onto the products of your choice. Stitching embroidery is the perfect option for office uniform, corporate clothing and general office wear. The process of stitching can however interfere with specialised garment properties, such as flame retardant and waterproofing. In this situation, please see below as a printed option would be more suitable to your requirement. If you have any queries please don't hesitate to speak to one of our experts.

Printed Logos and Text

As an alternative to embroidery, we also offer high quality printed logos and text. This process will provide a sharp professional finish and is suitable for most garments.  Printed logos cannot be added to fleeces as the material will be damaged during the heat sealing process.